← All drivers

TV and audio

Pioneer AV receiver

Pioneer amplifiers and AV receivers on the local network: on, off, volume, mute and source from Home. No internet or account needed.

What it does

  • Connected from Partner with the receiver's address. The hub finds it on the network by itself.
  • On and off, volume, mute, and the source by the names its inputs have on the receiver.
  • Every command is confirmed by the receiver itself.
  • Whatever its remote or front panel changes shows in Home at once.

Worth knowing

  • Main zone only. Zones 2 and 3, the tuner and sound settings are not shown.
  • Turning on from Home needs the receiver's «Network Standby».
  • The receiver takes one connection: while the hub holds it, the Pioneer app on a phone cannot connect.
  • Tested on a real VSX-922: on, source and volume from an automation. Volume steps only against a simulated receiver.

Setup guide

Driver: systems.arvio.pioneer. Local: it needs no internet and no account.

For Pioneer amplifiers and AV receivers (VSX, SC, VSA) with a network port, from about 2010 on.

What you need

  • The receiver on the same network as the hub, by cable or Wi-Fi.
  • Its address reserved on the router.
  • To turn it on from Home: «Network Standby» switched on in the receiver's network settings.
  • The Pioneer app (iControlAV) closed while connecting: the receiver takes one connection.

How it connects

If the driver is not in «Προσθήκη συσκευής» (Add device), bring it into the installation first: Marketplace → this driver → «Εισαγωγή σε εγκατάσταση» (Import into installation).

In Partner, open the hub and go to «Συσκευές» → «Προσθήκη συσκευής».

  1. Press «Ενισχυτής Pioneer» and pick the receiver it found, or type its address.
  2. Leave the port empty: the hub tries 23 and 8102.
  3. Give it a name, e.g. «Σαλόνι Ενισχυτής», and press «Σύνδεση».

When Partner says «Προστέθηκε», press «Ανανέωση» and put it in a room.

If the receiver was already in «Συσκευές» as an AirPlay speaker, it now shows twice. In «Συσκευές» press «Αντικατάσταση» (Replace), pick the AirPlay row as the old device and the Pioneer receiver as the new one: it keeps the old row's name, room and automations, and the AirPlay row does not come back. From then on Home's music no longer plays to it over AirPlay.

What works

  • On and off.
  • Volume, mute, and the source by the names its inputs have on the receiver.
  • Every command is confirmed by the receiver itself.
  • Whatever its remote or front panel changes shows in Home at once.

Limits

  • Main zone only. Zones 2 and 3, the tuner and sound settings are not shown.
  • Without «Network Standby» the receiver turns off from Home but not on.
  • The receiver takes one connection: while the hub holds it, the Pioneer app on a phone cannot connect.
  • Tested on a real VSX-922: on, source and volume from an automation. Volume steps only against a simulated receiver.

If something goes wrong

  • «Does not answer»: the receiver is unplugged, on another subnet, or the Pioneer app holds the connection.
  • It shows as unavailable: the connection dropped. The hub reconnects by itself once it answers.
  • It does not turn on from Home: switch on «Network Standby» in its network settings.
Pioneer AV receiver · Arvio Marketplace