Climate

Netatmo
Netatmo thermostats, radiator valves and weather stations through Arvio Cloud. You link the Netatmo account on Netatmo's own page, from Partner. Needs internet.
What it does
- Every room with a Netatmo thermostat or radiator valve becomes a climate: room temperature, target, and whether it is heating.
- «Auto» hands the room back to its Netatmo schedule, «Heat» sets a temperature by hand to the half degree, «Off» turns it off.
- Every change counts as done once Netatmo itself shows it.
- The weather station: temperature, humidity, CO₂, noise and pressure indoors, temperature and humidity outdoors, the modules' battery.
- The account's password never passes through Arvio: you type it at Netatmo. The hub keeps only a key of its own for this house.
Worth knowing
- Needs internet and Arvio Cloud. Values refresh every 5 minutes and after each change.
- Rooms on OpenTherm or pilot wire (Legrand, BTicino) are not loaded yet. Nor the whole home's mode (away, frost guard), nor schedules.
- The station's wind and rain gauges, Netatmo cameras and smoke alarms, not yet.
- Tested against a simulation so far, not yet with a real Netatmo account.
Setup guide
Driver: systems.arvio.netatmo. Through Arvio Cloud: the hub talks to Netatmo by way of SFK's cloud, so it needs internet.
For Netatmo thermostats (NATherm1), radiator valves (NRV) and weather stations.
What you need
- The house's Netatmo account, with the devices already set up in the Netatmo app (Home + Control or Weather).
- A hub with Arvio Core, on the internet.
How to connect
- In the Marketplace, «Εισαγωγή σε εγκατάσταση» (import into an installation) for Netatmo.
- On the hub → «Προσθήκη συσκευής» (Add a device) → «Netatmo» → «Σύνδεση με Netatmo» (Connect with Netatmo).
- Netatmo's own page opens. Sign in with the house's account and give the permission.
- You come back to Partner, and the hub gets its key by itself. If the hub did not answer at that moment, press «Στείλε στο hub» (Send to the hub).
- Press «Ανανέωση» (Refresh) under «Συσκευές» and put the thermostats, valves and sensors in rooms.
The Netatmo password is typed only at Netatmo. The cloud keeps the access keys encrypted, and the hub a key of its own, for this house only.
What works
- Every room with a thermostat or valve becomes a climate: room temperature, target temperature, whether it is heating.
- «Auto»: the room on its Netatmo schedule. «Heat»: a temperature by hand, to the half degree, from 7 to 30 °C. «Off»: off.
- Every change counts as done once Netatmo itself shows it.
- Weather station: temperature, humidity, CO₂, noise, pressure indoors; temperature, humidity outdoors; the modules' battery.
Limits
- Needs internet. Values refresh every 5 minutes and after each change, so a change made on the thermostat itself shows up to 5 minutes later.
- Rooms on OpenTherm or pilot wire (Legrand, BTicino) are not loaded yet.
- The whole home's mode (away, frost guard) and schedules are still changed only in the Netatmo app.
- Wind and rain gauges, Netatmo cameras and smoke alarms, not yet.
- Tested against a simulation so far, not yet with a real account.
If something goes wrong
- «Η Netatmo δεν έχει ρυθμιστεί ακόμα στο cloud της SFK» (not set up in SFK's cloud) → SFK's Netatmo app is missing. Talk to SFK.
- «Πέρασαν πάνω από 10 λεπτά» (more than 10 minutes on Netatmo's page) → press «Σύνδεση με Netatmo» again.
- «Η Netatmo δεν δέχεται πια τη σύνδεση» (Netatmo no longer accepts the link) → someone removed the permission in the Netatmo account. Connect it again.
- A room is missing → it is probably heated over OpenTherm or pilot wire, which is not loaded yet.
